File Logger Signal
Supported Targets: Olimexino, E407, P405
General information about File Logger Signal
The 'File Logger Signal' block configures the input signal of the block to be logged by the File Logger Module. This means that the value of the input signal will be sampled by the File Logger Module and written to the log-file on the SD-card.
Remarks
The File Logger Close block must be present and called explicitly to stop logging, otherwise no file will be written to the SD-card. Ideally, this block is called during software shutdown for example when the ignition signal goes low in automotive applications. An external trigger can also be used such as a button press event or CAN message reception.