Mechanical Connection
From OpenMBD
< SIMarchitect Library Overview | Component library | Powertrain | Mechanical Powertrain Components
Contents
General information about Mechanical Connection
Mechanical connection is used for connecting two input shafts and modeled using gear ratios and efficiencies.
Module
Bus Selector for module input
Module output
Output | ||||
---|---|---|---|---|
Node | Variable | Label | Description | Unit |
Sensor | No sensor signal | |||
mech out [Nm] | Mout | phys_torque_Nm | torque | Nm |
Jout | phys_inertia_kgm2 | inertia | kgm2 | |
mech fb out 1 [rad/s] | ωout,1 | phys_speed_radps | rotational speed | rad/s |
mech fb out 2 [rad/s] | ωout,2 | phys_speed_radps | rotational speed | rad/s |
Module Parameter
Variable | Parameter | Description | Unit |
---|---|---|---|
rin,1 | dat.in1.ratio.value | Gear ratio for input 1 | - |
J1 | dat.in1.inertia.value | Inertia | |
ηin,1 | dat.in1.mechefficiency.torque.vec | Mechanical efficiency for input 1 = f(torque,speed) | Nm |
dat.in1.mechefficiency.speed.vec | rad/s | ||
dat.in1.mechefficiency.efficiency.map | - | ||
dat.in2.ratio.value | Gear ratio for input 2 | - | |
J2 | dat.in2.inertia.value | Inertia | |
ηin,2 | dat.in2.mechefficiency.torque.vec | Mechanical efficiency for input 2 = f(torque,speed) | Nm |
dat.in2.mechefficiency.speed.vec | rad/s | ||
dat.in2.mechefficiency.efficiency.map | - | ||
dat.out.ratio.value | Gear ratio for output | - | |
Jout | dat.out.inertia.value | Inertia | |
ηout | dat.output.mechefficiency.torque.vec | Mechanical efficiency for output = f(torque,speed) | Nm |
dat.output.mechefficiency.speed.vec | rad/s | ||
dat.output.mechefficiency.efficiency.map | - |